(Concentrated Water-based Polymer Emulsion)
Our EXTRA-BOND is a water-based polymer emulsion. When added to Milk Paint it gives the paint greater adhesion to non-porous or previously finished surfaces. As an adjunct to Milk Paint, it is used by custom furniture builders, interior designers, craftsmen, and do-it-yourselfers on difficult surfaces. It is environmentally safe and non-toxic, hypo-allergenic, low odor and voc-free.


EXTRA-BOND is mixed with Milk Paint before painting on surfaces such as glass, baked enamel, primed metal, oil or latex painted surfaces, varnished, shellacked or polyurethaned surfaces.


Easy to use Long shelf life
Completely environmentally safe, non-toxic and voc-free Non-flammable
Fast drying No odor when dry
Easy soap and water clean-up


Color: White; dries clear/satin VOC’S: None
Consistency: Viscosity of heavy cream Clean Up: Soap and Water
Temperature: Best brushing consistency at 70° F to 85° F (room temperature) Drying Time: Approximately one hour
Combustibility: Non-combustible Freeze/Thaw Stability: None
Shelf Life: 1 to 2 years at room temperature ImportantDo not allow to freeze


Please Note: Two rules should always be followed in the application of MILK PAINT with Extra-Bond, or of any other finish for that matter:

1} Make sure the surface is perfectly clean.
2} First test the Milk Paint with Extra-Bond added on a scrap piece of the same surface material.
1} Thoroughly clean the surface to be painted. Use a cleaner that does not leave a soapy or oily residue such as TSP. Hard shiny surfaces should be dulled somewhat with Scotchbrite, sand-paper or steel wool.
2} Mix your milk paint according to package directions.  Then, add your Extra Bond directly to your mixed milk paint.  Mix together. You may use as little as one part EXTRA-BOND to two parts Milk Paint, but better adhesion may be achieved using equal parts.
3} If a second coat of Milk Paint is desired allow two hours between coats. EXTRA-BOND is not necessary and not recommended in the second coat.
4} Clean up with water. EXTRA-BOND should be stored at room temperature with the lid on tight.

Important: Do not allow to freeze


one pint (liquid measure)
one quart (liquid measure)
one gallon (liquid measure)